Remove deprecated samples

1 files changed, 0 insertions, 173 deletions

diff --git a/samples/dashboard_1602/dashboard_1602.ino b/samples/dashboard_1602/dashboard_1602.ino
deleted file mode 100644
index a357f4e..0000000
--- a/samples/dashboard_1602/dashboard_1602.ino
+++ /dev/null
@@ -1,173 +0,0 @@
-/*************************************************************************
-* Sample sketch based on OBD-II library for Arduino
-* Using a LCD1602 shield to display realtime vehicle data
-* Distributed under GPL v2.0
-* Copyright (c) 2012 Stanley Huang <stanleyhuangyc@gmail.com>
-* All rights reserved.
-*************************************************************************/
-
-#include <arduino.h>
-#include <Wire.h>
-#include <OBD.h>
-#include "LCD4Bit_mod.h"
-
-//create object to control an LCD.
-LCD4Bit_mod lcd = LCD4Bit_mod(2);
-
-COBD obd;
-
-//Key message
-unsigned int  adc_key_val[5] ={30, 150, 360, 535, 760 };
-int NUM_KEYS = 5;
-int adc_key_in;
-char key=-1;
-char oldkey=-1;
-unsigned long lastTick = millis();
-uint8_t modes[2] = {0, 2};
-
-const char modePids[] = {PID_RPM, PID_SPEED, PID_THROTTLE, PID_ENGINE_LOAD,
-	PID_COOLANT_TEMP, PID_INTAKE_TEMP, PID_AMBIENT_TEMP, PID_MAF_FLOW,
-	PID_CONTROL_MODULE_VOLTAGE, PID_FUEL_PRESSURE, PID_INTAKE_MAP, PID_BAROMETRIC,
-	PID_TIMING_ADVANCE, PID_FUEL_LEVEL, PID_RUNTIME, PID_DISTANCE};
-
-const char* modeLabels[] = {
-	"Engine       rpm", "Speed       km/h", "Throttle       %", "Engine Load    %",
-	"Coolant        C", "Intake Air     C", "Env. Temp      C", "MAF Flow     kpa",
-	"Ctrl Voltage   V", "Fuel         kpa", "Intake       kpa", "Barometer    kpa",
-	"Timing Adv.     ", "Fuel Level     %", "Run Time", "Distance      km"};
-
-const char modePos[] = {8, 8, 11, 12,
-	11, 11, 11, 9,
-	11, 9, 9, 10,
-	12, 11, 8, 10};
-
-const char* modeFmts[] = {"%4u", "%3u", "%3u", "%u",
-	"%3d", "%3d", "%3d", "%3u",
-	"%3u", "%3u", "%3u", "%u",
-	"%3d", "%3u", "%4u:%02u", "%04u"};
-
-#define TOTAL_PIDS (sizeof(modePids) / sizeof(modePids[0]))
-
-// Convert ADC value to key number
-char get_key(unsigned int input)
-{
-  char k;
-  for (k = 0; k < NUM_KEYS; k++) {
-    if (input < adc_key_val[k])
-      return k;
-  }
-  return -1;
-}
-
-void updateMode()
-{
-	lcd.cursorTo(1, 0);
-	lcd.printIn((char*)modeLabels[modes[0]]);
-	lcd.cursorTo(2, 0);
-	lcd.printIn((char*)modeLabels[modes[1]]);
-}
-
-bool showData(int index)
-{
-	char buf[16];
-	int value;
-	uint8_t mode = modes[index];
-	uint8_t pid = modePids[mode];
-	digitalWrite(13, HIGH);   // set the LED on
-	if (!obd.read(pid, value)) {
-                // display received data on error
-		lcd.cursorTo(index + 1, 0);
-		lcd.printIn("Error");
-		delay(2000);
-		updateMode();
-		return false;
-	}
-	digitalWrite(13, LOW);   // set the LED off
-
-	if (pid == PID_RUNTIME) {
-		sprintf(buf, modeFmts[mode], (unsigned int)value / 60, (unsigned int)value % 60);
-	} else {
-		sprintf(buf, modeFmts[mode], value);
-	}
-	lcd.cursorTo(index + 1, modePos[mode]);
-	lcd.printIn(buf);
-	return true;
-}
-
-bool setupConnection()
-{
-  uint8_t errors = 0;
-  char buf[16];
-  lcd.clear();
-  lcd.printIn("Connecting...");
-  while (!obd.init()) {
-	  lcd.cursorTo(2, 0);
-	  sprintf(buf, "Attempts #%d", ++errors);
-	  lcd.printIn(buf);
-  }
-  lcd.clear();
-  lcd.printIn("Connected!");
-  delay(1000);
-  updateMode();
-  return true;
-}
-
-void setup()
-{
-  pinMode(13, OUTPUT);  //we'll use the debug LED to output a heartbeat
-  lcd.init();
-  obd.begin();
-  setupConnection();
-}
-
-void loop()
-{
-	adc_key_in = analogRead(0);    // read the value from the sensor
-	key = get_key(adc_key_in);		        // convert into key press
-
-	if (key != oldkey) {
-		delay(50);		// wait for debounce time
-		adc_key_in = analogRead(0);    // read the value from the sensor
-		key = get_key(adc_key_in);		        // convert into key press
-		if (key != oldkey)
-		{
-			oldkey = key;
-			if (key >=0){
-				switch (key) {
-				case 3: // left key
-					do {
-						modes[0] = modes[0] > 0 ? modes[0] - 1 : TOTAL_PIDS - 1;
-					} while (modes[0] == modes[1]);
-					break;
-				case 0: // right key
-					do {
-						modes[0] = modes[0] < TOTAL_PIDS - 1 ? modes[0] + 1 : 0;
-					} while (modes[0] == modes[1]);
-					break;
-				case 1: // up key
-					do {
-						modes[1] = modes[1] > 0 ? modes[1] - 1 : TOTAL_PIDS - 1;
-					} while (modes[0] == modes[1]);
-					break;
-				case 2: // down key
-					do {
-						modes[1] = modes[1] < TOTAL_PIDS - 1 ? modes[1] + 1 : 0;
-					} while (modes[0] == modes[1]);
-					break;
-				}
-				updateMode();
-			}
-		}
-	}
-
-	unsigned long curTick = millis();
-	if (curTick - lastTick > 500) {
-		showData(0);
-		showData(1);
-		if (obd.errors > 10) {
-			setupConnection();
-		}
-		lastTick = curTick;
-	}
-}
-