From 8e57c683d3d16f1dee320f10c411602ea38ba651 Mon Sep 17 00:00:00 2001
From: Stanley Huang <stanleyhuangyc@gmail.com>
Date: Mon, 25 Mar 2013 00:57:28 +0800
Subject: initial commit
---
samples/dashboard_oled/dashboard_oled.ino | 158 ++++++++++++++++++++++++++++++
1 file changed, 158 insertions(+)
create mode 100644 samples/dashboard_oled/dashboard_oled.ino
(limited to 'samples/dashboard_oled/dashboard_oled.ino')
diff --git a/samples/dashboard_oled/dashboard_oled.ino b/samples/dashboard_oled/dashboard_oled.ino
new file mode 100644
index 0000000..96dd460
--- /dev/null
+++ b/samples/dashboard_oled/dashboard_oled.ino
@@ -0,0 +1,158 @@
+/*************************************************************************
+* Sample sketch based on OBD-II library for Arduino
+* Using a OLED module to display realtime vehicle data
+* Distributed under GPL v2.0
+* Copyright (c) 2013 Stanley Huang <stanleyhuangyc@gmail.com>
+* All rights reserved.
+*************************************************************************/
+
+#include <Arduino.h>
+#include <OBD.h>
+#include <ZtLib.h>
+#include <Wire.h>
+
+#define OLED_ADDRESS 0x27
+#define LOOP_COUNT 50
+
+const char PROGMEM font16x32[][32] = {
+{0x00,0xE0,0xF8,0xFC,0xFE,0x1E,0x07,0x07,0x07,0x07,0x1E,0xFE,0xFC,0xF8,0xF0,0x00,0x00,0x07,0x0F,0x3F,0x3F,0x7C,0x70,0x70,0x70,0x70,0x7C,0x3F,0x1F,0x1F,0x07,0x00},/*0*/
+{0x00,0x00,0x00,0x06,0x07,0x07,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00},/*1*/
+{0x00,0x38,0x3C,0x3E,0x3E,0x0F,0x07,0x07,0x07,0xCF,0xFF,0xFE,0xFE,0x38,0x00,0x00,0x00,0x40,0x40,0x60,0x70,0x78,0x7C,0x7E,0x7F,0x77,0x73,0x71,0x70,0x70,0x00,0x00},/*2*/
+{0x00,0x18,0x1C,0x1E,0x1E,0x0F,0xC7,0xC7,0xE7,0xFF,0xFE,0xBE,0x9C,0x00,0x00,0x00,0x00,0x0C,0x1C,0x3C,0x3C,0x78,0x70,0x70,0x70,0x79,0x7F,0x3F,0x1F,0x0F,0x00,0x00},/*3*/
+{0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x1E,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x06,0x07,0x07,0x07,0x06,0x06,0x06,0x06,0x06,0x7F,0x7F,0x7F,0x7F,0x06,0x06,0x00},/*4*/
+{0x00,0x00,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xE7,0xE7,0xE7,0xE7,0xC7,0x87,0x00,0x00,0x00,0x00,0x38,0x78,0x71,0x70,0x70,0x70,0x70,0x70,0x39,0x3F,0x3F,0x1F,0x0F,0x00},/*5*/
+{0x00,0x80,0xE0,0xF0,0xF8,0xFC,0x7F,0x7F,0x6F,0x67,0xE1,0xE1,0xC0,0x80,0x00,0x00,0x00,0x0F,0x1F,0x3F,0x3F,0x78,0x70,0x70,0x70,0x70,0x78,0x3F,0x3F,0x1F,0x0F,0x00},/*6*/
+{0x00,0x07,0x07,0x07,0x07,0x07,0xC7,0xE7,0xF7,0xFF,0x7F,0x3F,0x1F,0x07,0x03,0x01,0x00,0x20,0x38,0x7C,0x7E,0x3F,0x0F,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*7*/
+{0x00,0x00,0x00,0x1C,0xBE,0xFE,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFE,0xBE,0x1C,0x00,0x00,0x00,0x0E,0x3F,0x3F,0x7F,0x71,0x60,0x60,0x60,0x71,0x7F,0x3F,0x3F,0x0F,0x00},/*8*/
+{0x00,0x78,0xFC,0xFE,0xFE,0x8F,0x07,0x07,0x07,0x07,0x8F,0xFE,0xFE,0xFC,0xF8,0x00,0x00,0x00,0x00,0x01,0x43,0x43,0x73,0x7B,0x7F,0x7F,0x1F,0x0F,0x07,0x03,0x00,0x00},/*9*/
+};
+
+class COBDDash : public COBD
+{
+public:
+ void Connect()
+ {
+ char buf[16];
+
+ InitScreen();
+ for (int n = 1; !Init(); n++) {
+ sprintf(buf, "Connecting [%d]", n);
+ if (n <= 20)
+ DisplayString(buf);
+ else if (n == 21)
+ ClearScreen(); // blank screen after a while
+ }
+ DisplayString("Connected! ");
+
+ int value;
+ DisplayString("Wait ECU start", 0 , 2);
+ do {
+ delay(500);
+ } while (!ReadSensor(PID_RPM, value));
+ DisplayString("ECU started ", 0 , 4);
+ delay(500);
+ DisplayString("Wait ignition ", 0 , 6);
+ delay(500);
+ do {
+ delay(500);
+ } while (!ReadSensor(PID_RPM, value) || value == 0);
+ DisplayString("Engine started!", 0 , 6);
+ delay(1000);
+ }
+ void Loop()
+ {
+ int value;
+ byte count = 0;
+ ClearScreen();
+ DisplayString("rpm", 84, 0);
+ DisplayString("km/h", 84, 3);
+ for (;;) {
+ char buf[16];
+
+ if (count == 0) {
+ DisplayString("AIR: ", 0, 6);
+ if (ReadSensor(PID_INTAKE_TEMP, value)) {
+ sprintf(buf, "%4dC", value);
+ DisplayString(buf, 11 * 8, 6);
+ }
+ } else if (count == LOOP_COUNT / 2) {
+ DisplayString("ENGINE: ", 0, 6);
+ if (ReadSensor(PID_COOLANT_TEMP, value)) {
+ sprintf(buf, "%4dC", value);
+ DisplayString(buf, 11 * 8, 6);
+ }
+ }
+ if (count < LOOP_COUNT / 2) {
+ if (ReadSensor(PID_INTAKE_PRESSURE, value)) {
+ sprintf(buf, "%dkPa ", value);
+ DisplayString(buf, 5 * 8, 6);
+ }
+ } else {
+ if (ReadSensor(PID_ENGINE_LOAD, value)) {
+ sprintf(buf, "%d%% ", value);
+ DisplayString(buf, 8 * 8, 6);
+ }
+ }
+
+ if (ReadSensor(PID_RPM, value)) {
+ sprintf(buf, "%4d", value);
+ DisplayLargeNumber(buf, 16, 0);
+ }
+
+ if (ReadSensor(PID_SPEED, value)) {
+ sprintf(buf, "%3d", value);
+ DisplayLargeNumber(buf, 32, 3);
+ }
+
+ if (errors > 5) {
+ return;
+ }
+ count = (count + 1) % LOOP_COUNT;
+ }
+ }
+private:
+ void DisplayString(const char* s, char x = 0, char y = 0)
+ {
+ ZT.ScI2cMxDisplay8x16Str(OLED_ADDRESS, y, x, s);
+ }
+ void DisplayLargeNumber(const char* s, char x = 0, char y = 0)
+ {
+ char data[32];
+ while (*s) {
+ if (*s >= '0' && *s <= '9') {
+ memcpy_P(data, font16x32[*s - '0'], 32);
+ ZT.ScI2cMxDisplayDot16x16(OLED_ADDRESS, y , x, data);
+ } else {
+ ZT.ScI2cMxFillArea(OLED_ADDRESS, y, y + 1, x, x + 16, 0);
+ }
+ x += 16;
+ s++;
+ }
+ }
+ void ClearScreen()
+ {
+ ZT.ScI2cMxFillArea(OLED_ADDRESS, 0, 7, 0, 127, 0);
+ delay(10);
+ }
+ void InitScreen()
+ {
+ ZT.I2cInit();
+ ZT.ScI2cMxReset(OLED_ADDRESS);
+ delay(10);
+ ClearScreen();
+ }
+};
+
+COBDDash dash;
+
+void loop()
+{
+ dash.Connect();
+ dash.Loop();
+}
+
+void setup()
+{
+ OBDUART.begin(OBD_SERIAL_BAUDRATE);
+}
+
--
cgit v1.2.3