From c5a9fdb80df58015c0705d23e2208cb576affd7c Mon Sep 17 00:00:00 2001
From: Stanley Huang <stanleyhuangyc@live.com>
Date: Wed, 6 Jul 2016 14:57:50 +0800
Subject: Renaming read() to readPID() in OBD library
---
libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino | 6 +++---
libraries/OBD/examples/obd_uart_test/obd_uart_test.ino | 4 ++--
libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino | 2 +-
libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
(limited to 'libraries/OBD/examples')
diff --git a/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino b/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino
index fe9141a..c5b89fe 100644
--- a/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino
+++ b/libraries/OBD/examples/obd_i2c_test/obd_i2c_test.ino
@@ -74,7 +74,7 @@ void readMEMS()
Serial.println(gz);
}
-void readPID()
+void readPIDs()
{
static const byte pidlist[] = {PID_ENGINE_LOAD, PID_COOLANT_TEMP, PID_RPM, PID_SPEED, PID_TIMING_ADVANCE, PID_INTAKE_TEMP, PID_THROTTLE, PID_FUEL_LEVEL};
Serial.print('[');
@@ -87,7 +87,7 @@ void readPID()
Serial.print('=');
if (valid) {
int value;
- if (obd.read(pid, value)) {
+ if (obd.readPID(pid, value)) {
Serial.print(value);
}
}
@@ -117,7 +117,7 @@ void setup() {
}
void loop() {
- readPID();
+ readPIDs();
readMEMS();
}
diff --git a/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino b/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino
index 484262e..08106ec 100644
--- a/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino
+++ b/libraries/OBD/examples/obd_uart_test/obd_uart_test.ino
@@ -55,7 +55,7 @@ void readPIDSingle()
mySerial.print(millis());
mySerial.print(']');
mySerial.print("RPM=");
- if (obd.read(PID_RPM, value)) {
+ if (obd.readPID(PID_RPM, value)) {
mySerial.print(value);
}
mySerial.println();
@@ -65,7 +65,7 @@ void readPIDMultiple()
{
static const byte pids[] = {PID_SPEED, PID_ENGINE_LOAD, PID_THROTTLE, PID_COOLANT_TEMP, PID_INTAKE_TEMP};
int values[sizeof(pids)];
- if (obd.read(pids, sizeof(pids), values) == sizeof(pids)) {
+ if (obd.readPID(pids, sizeof(pids), values) == sizeof(pids)) {
for (byte i = 0; i < sizeof(pids) ; i++) {
mySerial.print('[');
mySerial.print(millis());
diff --git a/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino b/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
index d999159..619ae32 100644
--- a/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
+++ b/libraries/OBD/examples/rpm_led_i2c/rpm_led_i2c.ino
@@ -24,7 +24,7 @@ void setup()
void loop()
{
int value;
- if (obd.read(PID_RPM, value)) {
+ if (obd.readPID(PID_RPM, value)) {
// RPM is successfully read and its value stored in variable 'value'
// light on LED when RPM exceeds 3000
digitalWrite(13, value > 3000 ? HIGH : LOW);
diff --git a/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino b/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
index 691ee9c..a248307 100644
--- a/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
+++ b/libraries/OBD/examples/rpm_led_uart/rpm_led_uart.ino
@@ -24,7 +24,7 @@ void setup()
void loop()
{
int value;
- if (obd.read(PID_RPM, value)) {
+ if (obd.readPID(PID_RPM, value)) {
// RPM is successfully read and its value stored in variable 'value'
// light on LED when RPM exceeds 3000
digitalWrite(13, value > 3000 ? HIGH : LOW);
--
cgit v1.2.3